A-138i Interrupting Mixer
Slim Line Series

 

click to enlarge

 

Beim Modul A-138i handelt es sich um einen vierkanaligen Mischer, der als Besonderheit mit einem Mute-Schalter für jeden Kanal ausgestattet ist. Zusätzlich verfügt das Modul auch über zwei Arten von Einzelausgängen und einen zweifach ausgeführten Mix-Ausgang.
Alle Ein- und Ausgänge sind gleichspannungsgekoppelt. Daher ist das Modul sowohl zum Mischen Audio-Signalen wie auch Steuerspannungen geeignet. Für jeden der vier Eingänge steht ein eigener Abschwächer mit linearer Kennlinie zur Verfügung. Die Verstärkung liegt im Bereich 0...1. An den Einzelausgängen steht das abgeschwächte und ggf. geschaltete Signal des betreffenden Kanals zur Verfügung. Zwei Arten von Einzelausgängen sind vorhanden:

  • Single Output A: beim Beschalten der Einzelausgänge "A" (Single Out A) mit einem Patchkabel wird das betreffende Signal aus dem Summensignal entfernt. 
  • Single Output B: beim Beschalten der Einzelausgänge "B" (Single Out B) mit einem Patchkabel wird das betreffende Signal nicht aus dem Summensignal entfernt. Dieser Typ der Ausgänge ist nur für die Kanäle 1 und 2 verfügbar.

Der Ausgang ist doppelt vorhanden (Mini-Multiple).

Die Bedienelemente sind etwas enger angeordnet als bei den Standard-Modulen und es kommen kleinere, gummierte Drehknöpfe zum Einsatz. Dafür hat die Frontplatte nur eine Breite von 6TE. Das Modul ist in erster Linie für Anwendungen gedacht, bei denen wenig Platz zur Verfügung steht.


Module A-138i is a four channel mixer with an additional mute switch for each input. On top of that it is equipped with two types of single outputs and a dual mix output.  All inputs and outputs are DC coupled. Consequently the VCAs can be used to mix both audio and control voltages.
Each input is  - apart from the mute switch - equipped with a linear attenuator. The amplification range is 0....1.
The single outputs offer the attenuated and possibly muted signal of the channel in question. Two version of single outputs are available:

  • Single Output A: If a plug is inserted into the single output "A" socket the channel in question is removed from the sum signal.
  • Single Output B: If a plug is inserted into the single output "B" socket the channel in question is not removed from the sum signal. This type of single outputs is available only for the channels 1 and 2.

The output is twice available (two sockets, hard-wired like a multiple).

The distances between the controls and sockets are smaller as for the standard A-100 modules and rubberized small-sized knobs are used. In return the front panel has 6 HP width only. The module is primarily planned for applications where only limited space is available.


Breite/Width: 6 TE / 6 HP / 30.1 mm
Tiefe/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte / measured from the rear side of the front panel)
Strombedarf/Current:
+10mA (+12V) / -10mA (-12V)

Preise / Prices:
Standard Version : Euro 100.00
The price in US$ depends upon the exchange rate between Euro and US$ at the payment day.